No subject


Thu Jun 23 00:45:34 GMT 2005


it stops most of what's happening, however if it gets past Zone Alarm then
it gets caught by NukeNabber. The logs do not show a conflict, the problem
is that if the connection comes in on a port that ZoneAlarm has been told is
ok, then ZoneAlarm ignores that port(as far as I can see anyway). but
NukeNabber caught it as a portscan starting at port 53 and closed all ports
as it is suppose to. Now my question is how can I tell my computer to ignore
all request from an IP range?

Andrew (Andy) Leavens <><
leavensa at videotron.ca


-----Original Message-----
From: dshield-admin at dshield.org [mailto:dshield-admin at dshield.org]On
Behalf Of Johannes B. Ullrich
Sent: Monday, February 19, 2001 11:14 AM
To: dshield at dshield.org
Subject: RE: [Dshield] (no subject)


interesting that ZoneAlarm is not showing this. maybe NukeNappeer is
interfering with ZoneAlarm. Usually it is a bad idea to run multiple
firewalls at the same time, as they may disable each other.


-----Original Message-----
From: dshield-admin at dshield.org [mailto:dshield-admin at dshield.org]On
Behalf Of Andrew Leavens
Sent: Monday, February 19, 2001 8:26 AM
To: dshield at dshield.org
Subject: [Dshield] (no subject)


I am getting scanned by the following IP's  cs167127-8.austin.rr.com and
24-168-105-12.si.rr.com  unfortunately they are not setting off my Zone
Alarm but NukeNabber is catching them and shutting down the port  they are
attempting to use, my question is can I tell my computer to ignore all
communication from this IP group?

Thank you

Andrew (Andy) Leavens <><
leavensa at videotron.ca








More information about the list mailing list